You want a new garage that is clean, organized and more useful. We can help!

Our factory trained installers will come to your garage and:

• Install Designer Garage FINISHWall panels
• Install Designer Garage FINISHFloor tiles
• Add garage cabinetry
• Install high quality Maple workbench areas

Designer Garage Systems have created FINISHWALL and FINISHFLOOR to organize your garage to be your dream garage.

Q: How much weight can FINISHWALL hold?

A: FINISHWALL can hold up to 90 Pounds per Square Inch. The farther you store items away from the vertical wall, the more that number decreases. A 20" high Cabinet can hold about 100 lbs, a 30" cabinet can hold about 150 lbs, and a 50" cabinet can hold about 200 lbs.

Q: Can FINISHWALL be installed onto concrete walls?

A: FINISHWALL panels can not be installed directly on to concrete walls. We must first mount 2" x 3" ferring strips about 16" apart, directly onto the concrete wall. Once these ferring strips are in place, FINISHWALL can then be screwed to these studs.

Q: How do you work around switches and outlets in my garage?

A: First, we remove the front plate cover of the switches and outlets. We then remove the outlet (or switches) from the electrical box and pull them away from the wall. We then add an electrical box extender on top of the existing electrical box and then remount the outlet. By doing this, we bring the outlet (or switch) out from the wall to be flush with the FINISHWALL panel.

All garage door opener switches, sprinkler timer boxes, etc. are removed from the existing walls and remounted back on top of FINISHWALL.

Q: After I've had a Designer Garage storage system installed, can I have them come back out to install more if I find I need more storage space?

A: If you did not do a complete installation of FINISHWALL panels during your first installation, Designer Garage can come back out at any time to add to your existing FINISHWALL storage system. Using our unique FINISHTRIM, additional FINISHWALL can be added and modified so that you still maintain a seamless appearance on your walls.

Q: Why are there holes in FINISHFloor?

A: FINISHFLOOR tiles are ventilated to allow for water run-off and also air-flow. When your garage floor gets wet, either by wetting it down while cleaning, or from snow melting off of your automobile and sitting on the floor, the water runs out of your garage since your garage floor is built on a slight slope. Since FINISHFLOOR is ventilated, that water can drop down below the tiles and flow out of your garage. Any left over water spots on your concrete will evaporate, since the ventilated tiles allow for constant air-flow.

Q: How can you clean FINISHFLOOR?

A: FINISHFLOOR can be cleaned in a number of ways. One way is to take a shop-vac and run it over the garage floor. This will pick up any loose debris that may be under the floor tiles. Another option is a leaf blower. This will blow out any leaves or loose dust/dirt from under your tiles.

One of the most common ways is to use a hose or pressure washer. Starting at the back of your garage, simply hose it down with water. The water will run out of your garage under the tiles, and any left over water that accumilates underneath will evaporate. It is not necessary to remove tiles to clean the concrete under them.

Q: What is the warranty on FINISHFLOOR and FINISHWALL?

A: When professionally installed by a Designer Garage installer, Designer Garage FINISHWALL has a 20 year manufacturer's warranty, and FINISHFLOOR has a 20 year manufacturer's warranty. Both warranties cover manufacturer defects that result in rotting, cracking, warping, pitting, corroding, peeling, blistering, or non-uniform fading discoloration.